Gypsum Board Blade Range
The Fernite gypsum board blades range.
All Fernite gypsum board blades are manufactured from the highest quality European steel, specifically selected for the gypsum board industry.
We offer our gypsum board blades in a range of thicknesses, tooth pitches and coatings.
For more information, contact our experienced team
on +44 (0)114 244 0527.
Fernite are proud to supply many of the world’s leading gypsum board producers, across Europe, the Americas, Asia, Africa and Australia.
Manufacturers of world-class knives since 1832.
We’ve been supplying the global gypsum industry with superior quality gypsum board blades for over 50yrs and can trace our roots as a traditional knifemaker back as far as 1832.
For more information, contact our experienced team
on +44 (0)114 244 0527.
Please contact Keith to discuss your requirements
Office: +44 (0) 114 244 0527 Ext: 152
email: keith.rowland@fernite.co.uk
Mobile: 07801 081952
WhatsApp: 07801 081952
Available
Mon – Thu: 8.30am – 5.00pm
Fri: 8.30am – 3.45pm
Fernite guidance for optimum blade performance
Our gypsum board blades achieve optimum performance when mounted with the plain side facing the in-feed end of the conveyor. The tips are then in the same vertical plane at mid-point of cut, ensuring a clean cut.
With uniform, precise tooth pitch and straightness, Fernite blades can be easily mounted without the need for careful pairing and checking. For optimum cutting performance we recommend:
- The linear speed of the knife should be marginally faster than the speed of the conveyor line – ensuring the points exit from the cut cleanly, and ahead of the following board.
- When in cutting mode (as opposed to perforating) the knives are mounted with a maximum of 1mm clearance point to root at mid-point of cut.
- For optimum performance the root of the tooth should not pass through the paper – a 1mm clearance is recommended. This avoids the build-up of material in the roots of the teeth.
For more information, contact our experienced team on
+44 (0)114 244 0527.
Industry standard thicknesses
Tooth Pitch Range
Fernite gypsum board blades are supplied in a range of tooth pitches.
Choosing the correct tooth pitch for the thickness and type of board your plant produces can improve cutting performance.
Contact Keith on +44 (0) 114 244 0527 or email for a personalised recommendation for your plant.
A range of coatings available
Our long-life gypsum board blades are available in a range of coatings, get in touch to see which one would suit you best.
+44 (0) 114 244 0527
We’re always here to help.
Our friendly, expert team are here to support your success.
If you have any questions about our gypsum board blades, or would like a quote, please get in touch.
Call +44 (0)114 244 0527 or email
Alternatively, click below to complete our online enquiry form.
